BOBCAT BOBTACH SKID STEER LOWER PIVOT PIN BUSHING ARM REPAIR TAPER REAMER #3100

BOBCAT BOBTACH SKID STEER LOWER PIVOT PIN BUSHING ARM REPAIR TAPER REAMER #3100

XKUT

$ 250.00


THIS M2 HIGH SPEED SPIRAL FLUTE BOBCAT BOBTACH PIVOT PIN LOADER LIFT ARM REPAIR TAPER REAMER #3100 IS BRAND NEW AND MANUFACTURED WITH PRIDE IN THE U.S.A. BY XKUT. WE ARE THE MANUFACTURER OF THIS REAMER AND DO NOT RESELL FOR HUGE PROFITS--BUY DIRECT AND GET A HIGH QUALITY AMERICAN MADE REAMER FOR LESS. THIS REAMER WILL REPAIR THE GENUINE BOBCAT TAPER FOUND ON THE LOWER LIFT ARM WITH 7 DEGREE ANGLE ON A SIDE OR 14 DEGREE INCLUDED ANGLE PIVOT PINS. THIS REAMER WILL WORK FOR BOTH THE SMALL PIVOT PIN (T650) AND THE LARGE PIVOT PIN (T300) AT THIS DEGREE ANGLE. THE SMALL PIVOT PIN TAPER MEASURES: .9062 ON THE SMALL END, 1.500 ON THE LARGE END, 2.375 LENGTH OF TAPER, 4" OVERALL LENGTH OF PIN. THE LARGE PIVOT PIN TAPER MEASURES: 1" ON THE SMALL END, 1.750" ON THE LARGE END, 3" LENGTH OF TAPER, 5-1/4" OVERALL LENGTH OF PIN. THE PURPOSE OF THIS REAMER IS TO MAINTAIN THE ORIGINAL TIGHT TAPER IN THE LOADER ARM OR THE REPAIR BUSHING AND THEN PURCHASE NEW PIVOT PINS.  IF YOU CAN MAINTAIN A TIGHT FITTING TAPERED PIVOT PIN IN THE ORIGINAL LOADER ARM, YOU WILL SAVE $$ BY NOT HAVING TO HAVE YOUR LOADER ARM LINE BORED OUT TO A HUGE HOLE FOR A REPAIR BUSHING THAT WILL NEED WELDED IN.  WITH THIS REAMER YOU WILL BE ABLE TO MAINTAIN YOUR LOADER ARM BEFORE THE PIVOT PIN TAPER BECOMES AN ISSUE. THIS REAMER SHOULD BE ADDED TO YOUR MAINTENANCE LIST TO INCREASE THE LIFE OF THE LIFT ARM. YOU CAN ALSO USE THIS REAMER TO MAKE YOUR OWN REPAIR BUSHINGS FOR NEW PINS. THE STRAIGHT SHANK DIAMETER ON THIS REAMER IS 5/8". WE WILL GRIND THIS SHANK DIAMETER DOWN TO A MINIMUM OF 5/8" TO SUIT OUR CUSTOMERS AT NO EXTRA COST. THIS REAMER HAS 10 SPIRAL FLUTES. THIS TOOL IS DESIGNED TO BE USED IN THE FIELD OR SHOP WITH A HEAVY DUTY PORTABLE DRILL OR MAG DRILL. YOU CAN ALSO USE THIS REAMER BY HAND BY GRINDING FLATS ON THE SHANK AND USING A HUGE TAP WRENCH. THIS REAMER IS MADE FROM PREMIUM M2 HIGH SPEED STEEL AT 64 ROCKWELL, REMEMBER GUYS, THIS IS A REAMER NOT A DRILL! THE BASIC RULE OF THUMB IS TO RUN A REAMER AT HALF THE SPEED (RPM) AND TWICE THE FEED OF A DRILL. THIS REAMER WILL DO PRODUCTION RUNS AND CUT MATERIAL QUICKLY AT SPEEDS FROM 80 TO 150 RPM. THE USE OF CUTTING OIL OR OIL-BASED COOLANT IS STRONGLY RECOMMENDED FOR MAXIMUM PERFORMANCE AND FINISH. BECAUSE WE ARE THE AMERICAN MANUFACTURER, WE OFFER AN IN-HOUSE $20.00 PER REAMER RESHARPENING SERVICE (RETURN PRIORITY 2-DAY SHIPPING TO CUSTOMER INCLUDED) ON ALL XKUT REAMERS : ) SEE OUR OTHER AUTOMOTIVE, OFF-ROAD, MILITARY, AND RACING TAPERED REAMERS AND REAMER SETS IN OUR EBAY STORE "XKUT"

 BOBCAT 3-1/2 DEGREE ANGLE ON A SIDE OR 7 DEGREE INCLUDED ANGLE PIVOT PIN REAMERS ARE COMING SOON!!!!!

More from this collection